Epson Artisan 810 Series - Manual (Page 47)

Replacing Ink Cartridges 47
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability. Leave the expended cartridge(s) installed until
you have obtained a replacement, or the ink remaining in the print head nozzles may dry
out. If you remove a low or expended cartridge, you cannot reinstall and use it.
1. Turn on the Artisan 810 Series.
If a cartridge is low or expended, you see a
message on the display screen. Note which
cartridges need to be replaced and press
OK .
(You cannot print until you have replaced any
expended ink cartridges.)
If you’re replacing a cartridge before it’s
expended, follow the steps below.
2. Open the scanner.
Caution:
Make sure the Automatic Document Feeder is closed when you open the scanner.
3. Squeeze the tab on the cartridge and lift it straight
up. Dispose of it carefully. Do not take the used
cartridge apart or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water. Keep ink cartridges out of the reach of children.