Cisco ip phone 7945 - Manual (Page 5)

5
How Do I? Solution Tip
Operate the
LCD Screen? To control the cursor:
Press the >> softkey to re-position the cursor.
Press the << softkey to delete a character or digit in
an entry.
Operating your phone’s LCD
screen is easy. Use the
Navigation button, softkeys,
and the keypad to make your
selections.
Tip To exit out of a menu on
your phone’s LCD screen,
press the Exit softkey. To select a menu item:
Press the Navigation pad to select (highlight) a
menu item. Then press Select (Centre button with a
tick).
OR
Press the number key on your phone’s dial pad that
corresponds to the item number in the menu.
Use Voice
Mail?
Set up voice mail:
Press the Voicemail button on your Cisco IP
Phone or dial 85555 and enter your PIN/password as
prompted.
Allows you to save a recorded name set up a voice
greeting and change your PIN/password. (Press 0 for
help)
Voicemail ID: Your Ext
(eg. 88500)
Voicemail password: 12345
(you should log in and change
this)
When you have one or more
new voice mail messages, the
red light on your phone’s
handset remains lit.
For more information on using
Unity Voicemail refer to the
user guides section of the IS
website.
See Where to Find More
Information at the end of this
guide
Access voice mail:
Press the Voicemail button or dial 85555 and
inter your voicemail pin/password as prompted.
Access voice mail from another IP Phone:
Press the Voicemail button or dial 85555. When
prompted for a password press *. Enter your
voicemail ID and PIN/password as prompted
Access voice mail from outside NTU:
Dial 0115 848 5555. When you hear a Cisco Unity
message press *. Enter your voicemail ID and
PIN/password as prompted