Cisco IP Phone SPA 504G - Manual (Page 17)

Installing Your Phone
Connecting the Handset
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP) 11
2
Connecting the Handset
STEP 1 Turn the phone body over to expose the ports on the back of the unit.
!
CAUTION Do not insert a telephone line cord into the auxiliary port.
STEP 2 Insert the long end of the phone cord into the handset port on the phone body that is marked
with a phone symbol.
STEP 3 (Optional) Route the phone cord through the cable slot.
STEP 4 Insert the other end of the phone cord into the port at the bottom of the handset (not shown).
Installing the Stand (Optional)
NOTE Do not attach the desk stand if you want to mount the phone to the wall. If you are attaching a
Cisco SPA 500S attendant console, attach the console before attaching the desk stand.
STEP 1 Connect the phone stand by lining up the tabs on the stand with the slots on the phone body.
STEP 2 Slide the bottom tabs into the lower slots on the phone body and lightly press down on the
stand. It should easily slide into the upper stand slots. Do not force.