Cisco IP Phone SPA 504G - Manual (Page 57)

Using Advanced Phone Features
Configuring Date and Time Parameters on Your Phone
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP) 51
4
Configuring Date and Time Parameters on Your Phone
Setting Your Phone’s Date and Time
The date and time for your phone normally come from the SIP proxy server or NTP server.
However, if you need to change some date and time parameters, you can follow these steps:
STEP 1 Press the Setup button.
STEP 2 Select Time/Date.
STEP 3 Enter the date in the following format: mm*dd*yy (this will display as m/d).
STEP 4 Enter the time in the following format: hh*mm*ss (this will display as (h:mm).
STEP 5 If the time does not display am (a) or pm (p) correctly, adjust with Offset. To change from a.m.
to p.m., enter *12*00*00, to change from p.m. to a.m., enter #12*00*00.
STEP 6 Press save.
You can set just one of these choices, if necessary.
Advanced Procedures for Technical Support Personnel
!
CAUTION These menus are used to configure and troubleshoot your phone and the phone network. You
should not change these settings or perform these actions unless directed to do so by your phone
administrator or by your 8x8 Support Team. Errors can interrupt your service.
To access advanced menus, follow the procedures below.
STEP 1 Press the Setup button.