Cisco IP Phone SPA 504G - Manual (Page 66)

Using the Web Interface
Changing the LCD Contrast
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP) 60
5
Changing the LCD Contrast
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
STEP 3 Under Audio Volume, you can adjust the LCD contrast by entering a number between 1 and
10, with 1 being low contrast.
STEP 4 Click Submit All Changes.
Configuring the Phone Screen Saver
To configure the phone screen saver:
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the Phone tab.
Under General, you can configure the following:
• Screen Saver Enable: Turns the screen saver on and off.
• Screen Saver Wait: The number of seconds that the phone is idle before the screen
saver starts.
• Screen Saver Icon: The display type:
- A background picture.
- The station time in the middle of the screen.
- A moving padlock icon. When the phone is locked, the status line displays a
scrolling message “Press any key to unlock your phone.”
- A moving phone icon.
- The station date and time in the middle of the screen.
STEP 3 Click Submit All Changes.