Safety belts – Pontiac 2009 Vibe User Manual

Page 12

Advertising
background image

To raise the seatback:

1. Pull the seatback up and push it

back to lock it into place. The
safety belts should not be twisted
or caught in the seatback.

{

CAUTION

A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash.
The person wearing the belt could
be seriously injured. After raising
the rear seatback, always check
to be sure that the safety belts
are properly routed and attached,
and are not twisted.

2. Push and pull the top of the

seatback to check that it is locked
into position.

{

CAUTION

If the seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatback to be sure it is locked.

Safety Belts

This section of the manual describes
how to use safety belts properly.
It also describes some things not to
do with safety belts.

{

CAUTION

Do not let anyone ride where
a safety belt cannot be worn
properly. In a crash, if you or your
passenger(s) are not wearing
safety belts, the injuries can be
much worse. You can hit things
inside the vehicle harder or be
ejected from the vehicle. You
and your passenger(s) can be
seriously injured or killed. In the
same crash, you might not be, if
you are buckled up. Always fasten
your safety belt, and check that
your passenger(s) are restrained
properly too.

1-8

Seats and Restraints

2009 - Pontiac Vibe Owner Manual

Advertising