Pontiac 2006 Gto - Manual (Page 84)

Parking Brake
To set the parking brake, pull up on the parking brake
handle without pressing the release button. If the ignition
is on, the brake system warning light will come on.
See
Brake System Warning Light on page 3-27 .
To release the parking brake, hold the regular brake
pedal down. Pull the parking brake handle up until you
can press the release button. Hold the release button
in as you move the brake handle all the way down.
Notice: Driving with the parking brake on can
overheat the brake system and cause premature
wear or damage to brake system parts. Verify that
the parking brake is fully released and the brake
warning light is off before driving.
Shifting Into Park (P)
(Automatic Transmission)
{ CAUTION:
It can be dangerous to get out of your vehicle if
the shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll. If
you have left the engine running, the vehicle
can move suddenly. You or others could be
injured. To be sure your vehicle will not move,
even when you are on fairly level ground, use
the steps that follow. If you are pulling a trailer,
see
Towing a Trailer on page 4-34 .
1. Hold the brake pedal down with your right foot and
set the parking brake.
2. Move the shift lever into PARK (P).
• Press in and hold the shift lever button, located
on the top of the shift lever.
• Push the lever all the way toward the front of the
vehicle.
3. Turn the main key to LOCK.
4. Remove the key and take it with you. If you can
leave your vehicle with the main key in your
hand, your vehicle is in PARK (P).
2-24
2006 - Pontiac GTO Owner Manual