Pontiac 2005 G6 - Manual (Page 121)

Setting Cruise Control
{ CAUTION:
If you leave your cruise control on when you
are not using cruise, you might hit a button
and go into cruise when you do not want to.
You could be startled and even lose control.
Keep the cruise control switch off until you
want to use cruise control.
The cruise control buttons are located on the steering
wheel.
J
(On/Off): Press this button to turn the cruise
control system on and off.
+RES (Resume): Press this part of the button to
resume a set speed and to accelerate the speed.
−
SET (Set): Press this part of the button to set a speed
and to decrease the speed.
To set a speed do the following:
1. Press the on/off button to turn cruise control on.
The indicator light on the button will come on.
2. Get to the speed you want.
3. Press the
−
SET part of the control button and
release it. The cruise symbol will display in the
instrument panel cluster to show the system
is engaged.
4. Take your foot off the accelerator pedal.
When the brakes are applied, the cruise control shuts off.
If the vehicle is in cruise control and the Traction
Control System (TCS) or Enhanced Traction
System (ETS) begins to limit wheel spin, the cruise
control will automatically disengage. See Traction
Control System (TCS) on page 4-8 and Enhanced
Traction System (ETS) on page 4-10. When road
conditions allow, the cruise control can be used again.
3-11