Setting the time for radios without radio, Data systems (rds) -45, Setting the time for radios with radio – Pontiac 2005 G6 User Manual

Page 155

Advertising
background image

Setting the Time for Radios without
Radio Data Systems (RDS)

To set the hour, press the clock button. The clock
symbol will appear on the display and the hour number
will flash. Then turn the ADJ knob to increase or to
decrease. To set the minutes, press the clock button
again. The minute numbers will flash. Then turn the
ADJ knob to increase or to decrease. The time can be
set with the ignition on or off.

Setting the Time for Radios with
Radio Data Systems (RDS)

To set the hour, press the clock button. The clock
symbol will appear on the display and the hour number
will flash. Then turn the ADJ knob to increase or to
decrease. To set the minutes, press the clock button
again. The minute numbers will flash. Then turn the
ADJ knob to increase or to decrease. The time can be
set with the ignition on or off.

To synchronize the time with an FM station broadcasting
Radio Data System (RDS) information, press and
hold the clock button to enter the clock set mode, then
press and hold the clock button for three seconds
until UPDATED appears on the display. If the time is
not available from the station, NO UPDATE will appear
on the display.

RDS time is broadcast once a minute. After tuning to an
RDS broadcast station, it may take a few minutes for
the time to update.

3-45

Advertising