Hdtv, H d t v – Daewoo DSC30W60N User Manual
Page 19
15
HDTV
H D T V
3.
Press the PREV button to return to the SETUP menu.
4.
Use the up/down arrow buttons to highlight Channel Setup
and then press the SEL button.
The CHANNEL SETUP menu is displayed.
5.
Use the up/down arrow buttons to highlight Channel
Scanning and then press the SEL button.
The CHANNEL SCANNING menu is displayed.
To scan the channels into the HDTV memory
•
If
Yes is highlighted, press the SEL button to begin channel
scanning.
•
If
No is highlighted, use the up/down arrow buttons to
highlight Yes and then press SEL to begin channel scanning.
The HDTV will scan the channels and memorize all channels it
can receive.
When the channel scan is finished, press the MENU button
until the menus disappear from the screen, or press the PREV
button to select another menu option.
To exit the menu without scanning the channels
•
If
Yes is highlighted, use the up/down arrow buttons to
highlight No and then press the SEL button to return to the
previous menu.
•
If
No is highlighted, press the SEL button to return to the
previous menu.
❑ NOTE: Whenever you change the input source (Antenna or
Antenna + Cable) from the INPUT SELECT menu, you
should scan the channels again.
CHANNEL
SETUP
• Check Signal Strength
• Channel Scanning
• Add/Erase Channel
• Fine Tuning
Select one of the
channel options.
Move
SEL
Select
CHANNEL
SCANNING
This function will rescan channel and update
your channel map.
• Yes
• No
Start channel scan
Move
SEL
Select
CHANNEL
SCANNING
This function will rescan channel and update
your channel map.
• Yes
• No
Channel scanning.... #CH22
28%
Move
SEL
Select