Daewoo DSC30W60N - Manual (Page 38)

34
Setting Locks and Limits
Your HDTV can set locks and limit the kinds of programs that your family can watch.You can do this by
choosing a password and a settings a ratings limit.
Changing the password
1. Press MENU and highlight LOCKS & LIMITS. Press the SEL
button.
You will see a screen that asks you to enter a password. Using
the Number buttons or the arrow buttons, enter your
password. (The factory’s preset password is 1,2,3,4.) You will
see the LOCKS & LIMITS menu. Use the up/down arrow buttons
to highlight “Change Password,” then press the SEL button.
2. You will see the CHANGE PASSWORD screen. Using the
Number buttons or the arrow buttons, enter a new password.
3. You will see a screen that asks you to reenter a password.
You have to reenter your password for confirmation. If the
verification fails, the error message will pop up.
❑ NOTE: Be sure to write down your password and store in a
safe place in case you forget it. If you lose your password,
please call Daewoo at 1-800-DAEWOO-8.
Setting rating limits
You can set rating limits that automatically black out programs that exceed the limit you set.
To do this:
1. From the LOCKS & LIMITS menu, use the up/down arrow
buttons to highlight Rating Limit, then press the SEL button.
CHECK
PASSWORD
Enter Password
Enter your
password.
Move Number
#
CHANGE
PASSWORD
Enter Password
Enter your new
password.
Password must
be four digits.
Move
#
Number