Denon DVD-1600 - Manual (Page 10)

10
ENGLISH
Enjoying virtual surround effects
with 2 speakers or headphones—
VIRTUAL SURROUND SOUND
(V.S.S.)
[DVD-V] [VCD]
SP-V.S.S.: Dolby Digital, DTS, MPEG, Linear PCM, 2-channel or
over only
HP-V.S.S.: Dolby Digital, MPEG, Linear PCM, 2-channel or over
only
Use V.S.S. (Virtual Surround Sound) to enjoy a surround-like effect if
you are using 2 front speakers or headphones.
If you are playing a disc with surround effects recorded on it, the
effect is broadened and sound seems to come from virtual speakers
on either side.
During play
Press [SP-V.S.S.] or [HP-V.S.S.].
Each time you press the button:
SP 1/HP 1: Natural effect
;
SP 2/HP 2: Emphasized effect
;
SP OFF/HP OFF: Cancel (Factory preset)
Note
≥ Virtual Surround Sound will not work, or will have less effect with
some discs, even if you select “1” or “2”.
≥ Turn off the surround sound effects on the equipment you have
connected when using this effect.
≥ Turn Virtual Surround Sound off if it causes distortion.
≥ Output from this unit will be in stereo (two channels) when Virtual
Surround Sound is on.
Optimum seating position
Using headphones
1
Set [PHONES LEVEL] to “MIN” and
connect the headphones (not includ-
ed).
Headphone plug type: 6.3 mm stereo
2
Adjust headphone volume with
[PHONES LEVEL].
Note
Avoid listening for prolonged periods of time to prevent hearing
damage.
A
Selecting still pictures—Page Skip
[DVD-A]
Remote control only
During play
Press [PAGE].
The page changes each time you press the button.
Changing picture quality for movie
viewing—CINEMA
[DVD-A] [DVD-V] [VCD]
Remote control only
You can enjoy better pictures by changing the picture quality.
Press [CINEMA].
Each time you press the button:
C: Cinema mode: Indicator lights up.
Mellows movies, enhances detail in dark scenes.
:
;
N: Normal mode (Factory preset)
For your reference
You can make finer adjustments to the picture if desired (
➡ page 15,
Digital picture mode—User mode).
To enjoy even higher quality
sound—AUDIO ONLY
[DVD-A] [DVD-V] [VCD] [CD]
You can enjoy higher quality audio by stopping the video signal.
Press [AUDIO ONLY].
≥ The indicator on the main unit lights.
≥ AUDIO ONLY is canceled if you press the button again or turn the
unit off. The light goes out.
Note
≥ Video signals are output while the disc is stopped and when opera-
tions such as searching are performed. The television screen can
appear unusual while video signals are not being output.
≥ The television may be distorted when video signals are turned on
and off when you turn AUDIO ONLY on and off, but this is not a
malfunction.
^------------------}
Numbered
buttons
Speaker Speaker
3 to 4 times distance A
O O O O O When using the
television’s speakers N N N N N
Distance A l
Television’s width
Seating position
SP-V.S.S.
HP-V.S.S.
1
ENTER
3 , 4 , 2 , 1 /
AUDIO ONLY
ENTER
POWER
STOP STILL / PAUSE PLAY
OPEN/CLOSE
SKIP
TOP MENU MENU
DISPLAY RETURN
GROUP PAGE AUDIO ONLY
HP-V.S.S. SP-V.S.S.
6 : 9 5
∫ ;
SLOW / SEARCH
PLAY MODE SUBTITLE AUDIO ANGLE
1 2 3
A-B REPEAT
4 5 6
7 8 9
SET UP CLEAR
0 S 10
CINEMA
REPEAT MODE
1
REMOTE CONTROL UNIT
RC-551
AUDIO / VIDEO
PAGE
6 , 5
PLAY MODE
CLEAR
CINEMA
PAGE 1
PHONES PHONES LEVEL
MIN MAX
1
2
Basic play