Electrical connections, Single sensor operation – Nexen SW100 803354 User Manual
Page 8
8
FORM NO. L-20361-E-0713
ELECTRICAL CONNECTIONS
Use the cables provided with the sensors and the installation
wiring diagram supplied with the Nexen tension indicator
or controller for making the transducer connections. Make
certain the cables do not interfere with the web path and
they are away from gearing or other moving parts. Use
only the Nexen supplied cables.
These wiring diagrams are for reference only for use with
a dual (full bridge) sensor configuration (See Figure 5).
SINGLE SENSOR OPERATION
Single sensor operation requires the use of cable #
30517 and is not recommended by Nexen. The tension
indicators and controllers will perform best when used with
two sensors. For single sensor applications, consult with
Nexen Web Technical Support.
FIGURE 5
�