Lenco BT-4304 - Manual (Page 7)

Before you start the configuration, make sure that the Bluetooth® connection on your
Smartphone or tablet is turned on.
Important note: Some Bluetooth® devices may not be compatible with this device.
1. Turn on the device by pressing the standby button on the remote control or main
unit.
2. Go to Bluetooth® mode by pressing the BT button.
3. Wait until the Bluetooth® indicator LED burns continuously.
4. Search for Lenco on your Smartphone or tablet and connect with it.
5. If the pairing is successful the Bluetooth® indicator LED starts blinking.
Auto-pairing / connection: When the Bluetooth® connection gets interrupted or lost
switch to AUX mode by pressing the AUX button on the remote control or main unit
and switch back to Bluetooth® mode by pressing the BT button on the remote control
or main unit. The device with now automatically reconnect with the last paired
Smartphone or tablet. You can also turn the device off and on to reconnect.
Manual pairing / connection: In the case you would like to pair/connect other
Smartphone's or tablets, press the BT button to enter Bluetooth® mode, at the first
30 seconds, the device will search for the last paired Bluetooth® device. If the device
cannot find it after 30 seconds than you can follow about steps 3 to 5 to pair another
Smartphone or tablet.
Note: If the unit cannot find any Bluetooth® mobile device for pairing around an hour,
the unit will go into standby mode automatically.
Basic operation
 Use the standby button on the main unit or remote control to turn the unit on
and off.
 Volume + / - buttons on the main unit or remote control, press + to increase the
audio volume, press - to decrease the audio volume.
 Mute button on the main unit or remote control, press this button to turn off the
volume, press it again to turn on the volume.
 Press the clock button on the remote control to display the clock.
Bluetooth®
All of below functions only work if you are in Bluetooth® mode and if a Smartphone or tablet is paired.
Play your music
 Press the play button on the main unit or remote control to start or pause the
music playback.
 Next button, press this button on the main unit or remote control to go to the
next song.
 Previous button, press this button on the main unit or remote control to go to
the previous song.
 Volume + / - buttons, press + to increase the audio volume, press - to decrease
the audio volume.