Lenco BT-4650 - Manual (Page 5)

5
Before you will use the Bluetooth
®
pairing / connection, the following information will help:
(1) Whilst the unit is searching for a Bluetooth
®
device (e.g. iPhone), the status LED
indicator will fast blink in blue light.
(2) Whilst the unit paired/connected with a Bluetooth
®
device (e.g. iPhone), the status LED
indicator will slowly blink in blue light.
(3) The Bluetooth
®
device name of this model: Lenco
The PIN is: 0000
Bluetooth
®
pairing/connection
1. Press the POWER button to turn on the unit.
2. Press the POWER button to select Bluetooth
®
mode. The status LED indicator will blink fast
in blue light whilst the unit is searching nearby Bluetooth
®
device.
3. From the mobile device, turn on its Bluetooth
®
function and it will also search for the nearby
Bluetooth
®
device as well.
4. From the Bluetooth
®
device list of your mobile device, tap on Bluetooth
®
device name
“ Lenco” of this model for the connection. Enter the “0000” if it prompts for the PIN.
5. Once the mobile device is paired/connected with the unit, the status LED indicator will blink
slowly in blue light.
Playback Bluetooth
®
music
1. Playback your iPad/iPhone/iPod Touch or smart phone music.
2. You may adjust both the volume control of your mobile device and the volume control of this
unit to find the most desirable volume setting.
3. From your mobile device, you may press:
(a) the / button to Play / Pause Bluetooth music.
(b) the
/ button to skip tracks forward / backward.
Operation hints
(A) Auto-pairing/connection :
With your mobile device is paired and connected;
(1)
in the case of (i) pressing the POWER button a round trip back to the Bluetooth mode or
(ii) turn the unit off and on (at Bluetooth
®
mode) again;
(2) In the first 10 seconds after the unit entered the Bluetooth
®
mode, it will search the last
connected mobile device and will auto-pair/connect with it.
(3) Tap the button from the mobile device to resume music playback.
Note: Although the main unit disconnected the Bluetooth
®
connection, the mobile device still
takes time to complete the disconnection process. The mobile device screen still shows the
“connected” Bluetooth
®
symbol and at this moment it will not respond to the re-connection
request from the main unit. Once the mobile device finished the disconnection process, its
screen will show “disconnected” status and will start to respond main unit’s re-connection
request. Figure A illustrates example of some major mobile devices’ Bluetooth
®
symbols in
different status.