Lenco BT-4650 - Manual (Page 6)

6
Figure A :
Different mobile devices takes different operation time, in case at the time the Bluetooth
®
symbol
changed to “disconnected” status but the 1
st
10 seconds were over, try steps (A)-(1) to (3) above
for the auto-connection or try manual connection from your mobile device.
(B) Manual pairing/connection:
In the case you would like to pair/connect other mobile device;
(1)
Switch off the Bluetooth
®
function of the currently paired/connected mobile device.
(2) Main unit enters the Bluetooth
®
mode, after the 1
st
10 seconds, the unit will search for the
nearby Bluetooth
®
device and the Blue status LED indicator will blink fast.
(3) Turn on the Bluetooth function of the desired mobile device and pair/connect with
the main unit.
(C) Out of range situation:
(1) Whilst Bluetooth
®
music playback, the mobile device is moved to other place which is out
of the Bluetooth
®
communication range, the communication link disconnected then
moves back the mobile device within range.
(2) The main unit Bluetooth
®
mode Blue LED indicator will blink which also searches for the
nearby Bluetooth
®
device.
(3) In this case, you can reestablish the Bluetooth
®
communication link by implementing
approach (A) or (B) above.
Energy Saving Note
In Bluetooth
®
mode, if the Bluetooth
®
communication link disconnected for around 60 minutes,
the unit will go into standby mode automatically.
Listening to an external audio source
1. Connect an audio cable with 3.5mm stereo plug from an auxiliary audio device to the AUX IN
jack of the unit.
2. Press the POWER button to turn on the unit.