Clock setting, Sleep timer function – Lenco BT-9000 User Manual

Page 11

Advertising
background image

GB 11

Clock Setting

Auto-setting

The unit can auto-synchronize with the DAB radio station time information.

Each time a DAB station is received and its time information will be copied to this unit automatically which will over-

write current time setting on the unit.
Manual setting

When the unit is OFF (Standby mode):

Set 12/24 Hour format

1. Press the CLOCK button from the remote control entering 12/24 hour format setting mode.

2. Press the HR or MIN button from the remote control to select 12 or 24 hour display format.

Set Clock

3. Press the CLOCK button again entering time setting mode.

4. Press the HR button from the remote control to set hour.

5. Press the MIN button from the remote control to set minute.

Exit setting mode

6. To save all settings, press the CLOCK button or wait for a few seconds to exit the setting mode.

Sleep Timer Function

Sleep to timer

This feature allows you to fall asleep to the CD, radio or Bluetooth for up to 90 Minutes.

The unit shuts off automatically when the time expires.

1. Press the STANDBY button to turn the unit on.

2. Either tune to the desired FM or DAB radio station in radio mode, playback CD song or playback Bluetooth music.

3. To select the sleep timer to turn the unit off after 15, 30, 45, 60 or 90 minutes, press the SLEEP button (from the

remote control) repeatedly. The display shows the “SLEEP” indicator. The unit plays for the selected length of

time then automatically turns off.

4. To check the remaining sleep time, press the SLEEP button (from the remote control) once.

To turn the unit off before the sleep timer counts down to zero, press the STANDBY button at any time.

Notes:

● If you are falling asleep to music from an external device connected to the AUX-IN or LINE-IN input, the sleep

timer will shut off the power to this system but it will not turn off the external device.

● If you activate the sleep timer while a CD is playing, the unit will only continue playing until the end of the disc

then shut off automatically no matter the sleep timer setting. For example, if your CD is only 30 minutes long and

45 minutes sleep timer is selected, the unit will shut off approximately 3 minutes after the disc ends.

Advertising
This manual is related to the following products: