Lenco BTT-1 - Manual (Page 8)

8
NUMBER BUTTONS
In Radio status, press the NUMBER buttons to input the number of the required
frequency or band. For more information, see RADIO OPERATION.
PLAY/PAUSE BUTTON
In play status, press the PLAY/PAUSE button to pause, press this button again to
continue the playing.
Note: This button is unavailable in Audio Input mode.
Stop button
In play status, press the STOP button, the player will stop playing; Press the
PLAY/PAUSE button to resume playing mode.
Note: This button is only available in USB mode.
RANDOM BUTTON
In play status, press the RANDOM button once, the tracks will be played in a random
order, press it again to cancel this function and the tracks will be played in the original
order.
Note: This button is only available in USB mode.
REPEAT BUTTON
In play status, press the REPEAT button to repeat playing, press this button once to
repeat playing the current track, press again to repeat all tracks, press the third time
to cancel the setting.
Note: This button is only available in USB mode.
USB
It is possible to listen to audio files using the USB interface of this unit.
1. Connect the USB device with this unit.
2. Press the USB button on the remote control to play the USB.
3. Press the rewind or forward button to fast rewind or fast forward; Press the
previous or next button to go to the previous or next audio files.
4. To exit the USB mode: Press the BLUETOOTH, AUDIO or FM button, and switch
to other modes.
Note:
1) USB-Extension cable should have a max. length of 0.5m.
2) Depending on the amount of data and media speed, it may take longer for system
to read the contents of media device. In some cases, reading time may be as long as
60 seconds. This is not a malfunction.
3) Even when they are in a supported format, some files may not play depending on
the content.
BLUETOOTH
It is possible to listen to audio files using the BLUETOOTH interface of this unit.
1. Press the BLUETOOTH button to enter the bluetooth mode. The indicator light
flashes blue.
2. Start the bluetooth function on the device such as the mobile phone.
3. Place the device into Bluetooth search mode. The device will begin searching for
the speaker. Select the BTT-1 from the searched list.
4. When connecting successfully, the indicator light will be lit steadily. Then select the
track you want to play.