Lenco CR-3306 BT - Manual (Page 8)

8
Basic settings
Setting the clock
In standby mode, the device will display the clock on the LCD display. You can set the
clock as follows:
1. Make sure the device is in Standby mode.
2. Hold the time set button (17) for 3 seconds until 12H or 24H appears on the display.
3. Use the previous / next buttons (10, 12) to change the clock display format. You
can select 12 or 24 hours display format. To select the 12 hours display format,
make sure the display shows 12H . To select the 24 hours display format, make
sure the display shows 24H . Confirm the selection by pressing the clock set button
(10, 12). The device will automatically go to the screen for setting the clock.
4. Use the previous / next buttons (10, 12) to set the hours. Once the hours are set,
confirm the setting by pressing the time set button (17). The device will now
automatically switch to the screen for setting the minutes.
5. Use the previous / next buttons(10, 12) to set the minutes. Once the minutes are
set, confirm the setting by pressing the time set button (17). The device will now
return to the Standby mode and the set time is shown on the display.
Pair & Play™, connecting a Bluetooth® device
Pair & Play™ allows you to connect a Bluetooth® device with a simple press on the
button and it allows you to directly enjoy your favorite music.
1. Turn on the device by pressing the Power button (13).
2. Switch to the Bluetooth® mode by repeatedly pressing the source button (13).
Once the display shows blue, the device is in the Bluetooth® mode.
3. Go to the Bluetooth® menu on the external device and click on "Lenco". The
devices will now establish a connection. Depending on the external device, you
may have to give Lenco permission to automatically connect to the external device.
To increase user-friendliness, Lenco advises to allow establishing an automatic
connection. If the external device would ask for a PIN code, then input the code
0000.
4. Go to the music player on the external device and export your favorite music to the
Lenco radio.