Lenco CRW-2 - Manual (Page 3)

Installation
Clock setting battery back-up
A backup battery compartment located at bottom of the unit.
(1) Open the battery compartment lid.
(2) For clock setting backup, follow the polarity diagram shown inside the
compartment and install 2 x AAA (UM-4) batteries (purchase separately).
(3) Close the battery compartment lid.
AC-DC Adaptor Connection
The unit can be powered by an external AC-DC Adaptor, required the output DC 6V
350mA (included).
(1) Firmly and securely plug the adaptor's AC plug into AC main outlet.
(2) Connect the adaptor's DC output plug to the DC-in jack of the unit.
Warnings:
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
11. Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit exhibits a marked change in performance or does not operate normally.
12. Antenna
Do not connect an external antenna to the unit (other than that provided).
13. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a m
onth or
longer, the power cord should be unplugged from the unit to prevent damage or
corrosion.
14. Servicing
The user should not attempt to service the unit beyond those methods described
in the user's operating instructions. Service methods not covered in the operating
instructions should be referred to qualified service personnel.
Features
Thank you for purchasing the CLOCK RADIO WITH WAKE UP LIGHT.
This model incorporates following features :
AM (MW) / FM receiver with digital read out on LCD
Clock and Dual Alarm timer function
Wake up to Alarm (Buzzer), Radio or Melody with wake up light and
Snooze function
Sleep timer function
LCD display with back-light
Rainbow Light lampshade
4 5
Eng Eng