Lenco CRW-2 User Manual
Page 5
8
9
Radio Operation
Fully extend the FM Antenna wire for the maximum reception.
1. Press the POWER button to turn on the Radio.
2. Press the BAND button to select FM or AM(MW) band.
3. Rotate the TUNING wheel and tune to a desired station.
4. Adjust the sound level by rotating the VOLUME wheel.
5. You may press the SNOOZE button to display the clock for
around 10sec., if necessary.
Setting Clock Time
1. Turn the unit off.
2. Press and hold the TIME SET button until the hour digit blink.
Press UP
/ DOWN
button to set hour.
3. Press the TIME SET button again and the minute digit blink.
Press UP
/ DOWN
button to set minute.
4. Press the TIME SET button again to set 12 / 24 hours format.
Press UP
/ DOWN
button to select 12 or 24 hours format, if necessary.
5. Press the TIME SET button to exit clock setting mode.
Clock Setting
Listening to Radio
Alarm Clock Setting
Alarm Clock Setting
The unit incorporates Dual Alarm function, the alarm 1 and alarm 2.
It can wake you up from (by) Buzzer , Radio or Melody with "Sunlight" or
"Rainbow" light effect.
To select alarm source
1. Turn the unit off.
2. Slide the ALARM SOURCE switch to the desired position, BUZZER ,
RADIO or MELODY.
To set alarm time
3. Press and hold the AL1 (AL2) button until the hour digit blink.
Press
button to set hour.
4. Press the AL1 (AL2) button again and the minute digit blink.
Press
button to set minute.
5. Press the AL1 (AL2) button again and the alarm light effect indicators
RAINBOW and SUNLIGHT display.
Press
button to select the alarm light effect, where the
selected item will be underlined.
6. (a) When Wake to Melody is selected (the ALARM SOURCE switch is at
MELODY position), press the AL1 (AL2) button again will allow you to
select one of the three melody (sound effect) as the alarm sound as well.
Press
button to select the melody number 01, 02 or 03.
(b) When Wake to Radio is selected (the ALARM SOURCE switch is at
RADIO position), ensuring the desired radio channel is tuned and adjust
to a desired alarm volume level by rotating the VOLUME wheel.
(c) When Wake to Buzzer is selected (the ALARM SOURCE switch is at
BUZZER position), buzzer sound will wake you up once the alarm time
is reached.
7. Press the AL1 (AL2) button to exit alarm time setting mode.
UP
/ DOWN
UP
/ DOWN
UP
/ DOWN
UP
/ DOWN
Description of Parts
1. POWER button -- Turn the unit On and OFF.
2. LCD display
3. BAND button -- Select radio FM / AM (MW).
4. Speaker
5. Rainbow Light lampshade
6. LCD BACKLIGHT switch -- Select LCD backlight OFF/LO/HI.
7. RAINBOW LIGHT switch -- Select lampshade rainbow light OFF/LO/HI.
8. VOLUME wheel -- Adjust volume level up or down.
9. TUNING wheel -- Tune the radio channel frequency up or down.
10. TIME SET button -- Select clock setting mode.
11.
button -- Set Clock and Alarm time value.
12. ALARM SOURCE switch -- Select alarm source BUZZER/RADIO/MELODY.
13. AL1 button -- Select alarm 1 setting
14. AL2 button -- Select alarm 2 setting
15. SLEEP button -- Select the time duration of the sleep timer.
16. SNOOZE button -- Activate the snooze function.
17. Battery Compartment
18. FM Antenna wire
19. RESET button -- Reset the unit.
20. DC-in jack -- For the connection of external DC power supply
UP
/ DOWN
Eng
Eng