Lenco CS-351 BT - Manual (Page 11)

10
OPERATION OPERATION OPERATION OPERATION
set the radio frequency to Europe
frequency or USA frequency.
4) HOUR 24/12
You can select time format to 12 hour or
24 hour format. (In AREA item. When you
change the radio frequency to the EUR.
The time format will be changed to 24
HOUR format automatically.
When you
change the radio frequency to the USA.
The time format will be change to 12
HOUR format automatically.)
5) PCLK ON/OFF: no function.
AUXILIARY AUXILIARY AUXILIARY AUXILIARY INPUT INPUT INPUT INPUT
The unit can be connected to a portable
audio player through the AUX
AUX AUX AUX IN IN IN IN jack (30)
on the front panel. After finishing the
connection, you can press MOD
MOD MOD MOD button (5)
on the front panel to switch the mode to
AUX IN mode.
RADIO RADIO RADIO RADIO OPERATION OPERATION OPERATION OPERATION
SELECTING SELECTING SELECTING SELECTING THE THE THE THE FREQUENCY FREQUENCY FREQUENCY FREQUENCY BAND BAND BAND BAND
At radio mode, press BND BND BND BND button (24)
shortly to select the desired band.
The reception band will change in the
following order:
FM1 / FM2 / FM3 / AM
SELECTING SELECTING SELECTING SELECTING STATION STATION STATION STATION
Shortly press / buttons (1) to activate
automatic seek function. Press for several
seconds until “MANUAL……” appears on
the display, the manual tuning mode is
selected. If both buttons have not been
pressed for several seconds, they will
return
to seek tuning mode and
“AUTO……” appears on the display.
AUTOMATIC AUTOMATIC AUTOMATIC AUTOMATIC MEMORY MEMORY MEMORY MEMORY STORING STORING STORING STORING & & & &
PROGRAM PROGRAM PROGRAM PROGRAM SCANNING SCANNING SCANNING SCANNING
- Automatic memory storing
Press AS/PS
AS/PS AS/PS AS/PS button (20) for several
seconds “SEARCH” will appear on LCD.
the radio will search from the current
frequency and checks the signal
strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding preset
number button.
- Program scanning
Press A A A AS/PS S/PS S/PS S/PS button (20) shortly to scan
preset station. And the corresponding
station number P1~P6 will flash on LCD.
S S S SCAN CAN CAN CAN
Press SCAN SCAN SCAN SCAN button (18) to enter scan
mode, the unit will scan to higher frequency
station and keep on each station for several
seconds (the corresponding frequency will
flash 5 times on LCD).
STATION STATION STATION STATION STORING STORING STORING STORING
Searched a station press preset button (1-6)
for several seconds (until 2’nd beeps come
out), current station is stored into the
number button.
RDS RDS RDS RDS (RADIO (RADIO (RADIO (RADIO DATA DATA DATA DATA SYSTEM) SYSTEM) SYSTEM) SYSTEM)
OPERATION OPERATION OPERATION OPERATION
- Setting RDS mode
Press AF AF AF AF button (21) and release
immediately to switch on or off RDS
mode.
Whenever RDS is switch on, “RDS” will
flash on LCD.
- USE PT PT PT PTY Y Y Y BUTTON (17)
1) Shortly press PTY PTY PTY PTY button (17) will
enter PTY SELECT mode, the
program name will be displayed on
the LCD, you can use
/ (25) to
select the items and press /
buttons (1) to begin search the
corresponding program.
2) Press and hold PTY PTY PTY PTY button (17) will
enter RDS MENU, in the menu, use
/ (25) to select the items and
press / buttons (1) to adjust
corresponding item.
There are below items for you to
adjusting: