Lenco CS-351 BT - Manual (Page 19)

18
OPERATION OPERATION OPERATION OPERATION
Example:
TALK volume
MAIN volume
00 = 60
01 = 62
02 = 64
……………………..
20
= 100
���� MAKING MAKING MAKING MAKING AN AN AN AN OUTGOING OUTGOING OUTGOING OUTGOING CALL CALL CALL CALL
1) Making an outgoing call from
SPEED DIAL, RECEIVED LIST,
DIALED LIST, MISSED LIST, PHONE
BOOK(Mobile Phone) and PHONE
BOOK (SIM Card) please refer to the
T-MENU T-MENU T-MENU T-MENU section.
2) Making an outgoing call by inputting
the phone number manually.
Press button (4) on the front panel
“CALL_” will appear on LCD. Use 0~9,
*, # buttons to enter the phone
number you want to dial. (Note:
shortly press * button will input “*”
character, press and hold it will input
“+” character). Then press button
(4) again will call the number.
Note: if you input the wrong number
shortly press CLR
CLR CLR CLR button (24) to clear
it. Press and hold CLR CLR CLR CLR button (24) will
clear all numeric.
���� TRANSFER TRANSFER TRANSFER TRANSFER THE THE THE THE CALL CALL CALL CALL BETWEEN BETWEEN BETWEEN BETWEEN
MOBILE MOBILE MOBILE MOBILE PHONE PHONE PHONE PHONE AND AND AND AND THE THE THE THE UNIT UNIT UNIT UNIT
During the talking mode, you can press
and hold TRANSFER
TRANSFER TRANSFER TRANSFER( T-MENU) T-MENU) T-MENU) T-MENU) button
(6) to transfer the phone call between
the mobile phone and the unit.
Note:
1) If you transfer the call to mobile
phone, the mute of the present mode
will be released at the same time.
2) When making an outgoing call, it’s
not possible to transfer if the call is
not being answered yet.
� BT BT BT BT reset reset reset reset: ：In BT AUDIO mode. Press
and hold BND/LOU/ key for
several seconds. Some of the
bluetooth information will be reseted
(The RECELVED / DIALED / MLSSED
information will be lost).
���� BLUETOOTH BLUETOOTH BLUETOOTH BLUETOOTH AUDIO AUDIO AUDIO AUDIO (A2DP (A2DP (A2DP (A2DP
FUNCITON) FUNCITON) FUNCITON) FUNCITON)
The unit supports Bluetooth audio
function. If your mobile phone can play
stereo audio, when the pairing is ok,
you can choose the unit you have
paired to play the stereo music.
M1, M2, button on the front panel of the
unit serves as PAUSE/PLAY and STOP
control button. (It is up to the mobile
phone, the different mobile phone has
the different define.)
Use / button (1) on the front panel
of the unit to choose the previous/next
track. (It is up to the mobile phone, the
different mobile phone has the different
define)