Lenco CS-470 DVD - Manual (Page 10)

9
2. Common Operation
1. To turn on/off the unit
In power off mode, short press the POWER button to turn on the unit.
In power on mode, long press the POWER button on the front panel or short press the POWER button on
the remote control to turn off the unit.
2. To slide the monitor of the Car Audio System out of/into the chassis
Pressing the OPEN button can slide the monitor of the Car Audio System out of the chassis or slide it into
the chassis.
3. To select an optimal angle of the monitor of the Car Audio System
To select an up-down optimal angle of the monitor of the Car Audio System, press the DOWN/UP button
on the monitor or ANG button on the remote control repeatedly.
4. To select function mode
Press the MODE button to select RADIO, DISC (After inserting
a disc), USB(After inserting a USB storage), CARD(After inserting
a card), AUX or BLUETOOTH mode.
During playback, tapping the
icon after popping up
Keyboard interface can pop up Mode Menu as right.
Then tap one icon in it to select your desired mode.
5. To adjust sound level
Rotate the VOL knob on the front panel or press or hold
the + or - button on the remote control to directly adjust the volume level.
6. To mute sound
Press the MUTE button on the remote control to turn on/off MUTE mode.
Pressing the POWER button on the front panel shortly also can turn on/off MUTE mode.
7. To display clock time
Press the CLK button to display clock time on the small monitor of the front panel.
After sliding the monitor into the chassis, pressing the CLK button can display time on the small LCD.
8. To select a desired EQ mode
Press the EQ button on the remote control to select one of the preset music equalizer curves: POP, ROCK,
CLAS, OFF. The sound effect will be changed.
9. To turn on/off LOUD mode
Press the LOUD button to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when bass is not enough.
10. To remove the front panel and reset the player
When the monitor or the small LCD display wrongly or some buttons are not available or sound is distorted,
press the REL button on the front panel to detach the front panel and then pull it rightward and then
leftward to remove it, then press the RESET button to rehabilitate the distorted program to zero.
11.To do setup
To do setup, tap the icon in the Main Menu to turn to SETUP
interface as right.
In the interface, select one of GENERAL, TIME, AUDIO,
VIDEO ,RADIO , CALIBRATE by tapping them, then set
them by tapping some icons on the right side accordingly.
Mode Menu