Lenco CS-470 DVD - Manual (Page 17)

16
4.17 Change the Audio Language
1. In the state of DVD playing, press the AUDIO button repeatedly on the IR remote control to select the
desired language type. (depend on the media used)
2. In the state of VCD playing, press the AUDIO button repeatedly to select the sound mode of the MONO L,
MONO R, MIX MONO and Stereo, no language function.
3. In the state of CD/WMA/MP3 playing, the AUDIO button is invalid.
4.18 Look over the Playback Status
1. In the state of DVD playing, press the OSD button repeatedly on the remote control to turn on/off the
playback status. When it is on, it will display the information such as: the serial number of the playing title,
the serial number of the playing chapter, the elapsed time of the playing chapter, the remained time of the
playing chapter, the elapsed time of the playing title, the remained time of the playing title, etc.
2. In the state of VCD/CD playing, press the OSD button repeatedly on the remote control to turn on/off the
playback status. When it is on, it will display the information such as: the serial number of the playing track,
the elapsed time of the playing track, the remained time of the playing track, the elapsted time of the disc,
the remained time of the disc.
3. In the state of MP3/WMA playing, press the OSD button repeatedly on the remote control to turn on/off the
playback status. When it is on, it will display the information such as: the serial number of the playing track,
the elapsed time of the playing track, the remained time of the playing track.
4.19 Program Playback
It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD to
play.
1 During playback, press the PROG button to enter a program interface as follows:
2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number.
3 Use the number button to input desired sequence number of title/chapter/ track with desired sequence.
4 Use the direction button to move cursor onto Play item, then press the OK button to play the programmed
titles/chapters/tracks in programmed order; only pressing the PLAY button also can play the programmed
titles/chapters/tracks in programmed order.
* To exit program playback, firstly press the STOP button, then press the PLAY button to enter sequence
playback; or press the PROG button twice again.
* To remove the all programmed sequence numbers, move the cursor onto Clear item, then press the OK
button.
* To change the programmed sequence, move the cursor onto the item you want to change, input the
desired sequence number.