Lenco IR-3000 - Manual (Page 10)

Queuing up tracks for playback later
1. Highlight the required track.
2. Press the SELECT button. ‘Track Added To Queue’ will be displayed.
Queuing up albums for playback later.
1. Highlight the required album.
2. Press the SELECT button. ’Tracks Added to Queue’ will be displayed.
Controlling playback
1. Use the STOP button to stop playback.
2. Use the PLAY/PAUSE/STOP button to either pause a currently playing track or to restart a
currently paused track or to restart a stopped track.
3. Press the PLAY/PAUSE/STOP button for 2 seconds to stop a currently playing track.
4. Use the PREVIOUS button to start playback of the previous track in the queue.
5. Use the NEXT button to start playback of the next track in the queue.
6. Use BROWSE button to browse the media source e.g. playing track name
Browsing the list of tracks currently queued up for playback
1. Press the BROWSE button from the remote control. The currently playing track name will be
displayed.
2. Rotate the dial to see which tracks are queued up for playback.
3. If you want to jump to a particular place in the queue the SELECT button when the required
track is displayed.
Playing tracks in random order
1. Select the individual tracks as described previously.
2. Navigate to top-level menu item ‘Media Player’ using the SELECT and BACK buttons.
3. Press the SELECT button.
4. Rotate the dial until ‘Playback Mode’ is displayed.
5. Press the SELECT button.
6. Rotate the dial until ‘SHUFFLE’ is displayed.
7. Press the SELECT button.
8. Rotate the dial to select YES/NO to confirm that Shuffle mode should be enabled.
Playing tracks in the queue repeatedly
1. Select the individual tracks as described previously.
2. Navigate to top-level menu item ‘Media Player’ using the SELECT and BACK buttons.
3. Press the SELECT button.
4. Rotate the dial until ‘Playback Mode’ is displayed.
5. Press the SELECT button.
6. Rotate the dial until ‘Repeat’ is displayed.
7. Press the SELECT button.
8. Rotate the dial select YES/NO to confirm that Repeat mode should be enabled.
Clearing the Queue
To clear the current Queue:
1. Navigate to the top-level menu item ‘Media Player’ by using the SELECT and BACK buttons.
2. Press the SELECT button.
3. Rotate the dial until ‘Clear Queue’ is displayed.
4. Press the SELECT button. ’Queue Cleared’ will be displayed.
B. If you select ‘UPnP Severs’ menu
- 9 -