Lenco MCi-220 - Manual (Page 6)

UK-5
USB/SD CARD OPERATION
During in the STANDBY mode
1. Insert the USB DEVICE or SD CARD, and then press the STANDBY/ON button on the unit (or remote control) to
power"ON" the unit.
2. Press the CD/iPod/USB/CARD button on the unit (or remote control) to select the USB or SD CARD mode. The
main unit will automatically read the total number of the folders and tracks at the same time. (F4,F5) The unit will
play the first track automatically.
3. If the USB memory device more than one folder.
a. Press the FOLDER(UP or DOWN) button on the remote control to select each folder.
b. Press the SKIP/TUNE SEARCH (UP or DOWN) button on the unit (or remote control) to select current track in
desired folder.
Note: 1. The main unit can play MP3 and WMA only in this mode.
3. The main unit does not support the WMA file which is protected by "DRM FILE". It just support USB version
1.1 and 2.0.
1. Press the PLAY/PAUSE/SCAN/ENTER button once, the time elapsed indicator will flash.
2. Press the SKIP/TUNE SEARCH(UP or DOWN) button once to change Track NO., press and hold the SKIP/TUNE
SEARCH(UP or DOWN) button on the unit once (or remote control) to skip fast forward or backward of each song.
3. To resume playback, press the PLAY/PAUSE/SCAN/ENTER button once more again.
4. To change the ALBUM NO., press the FOLDER(UP or DOWN) button on the remote control once.
5. To stop playback, press the STOP/MENU/
button once on the unit (or remote control).
2. This unit can support most of USB devices and SD/SDHC cards (up-to 32GB memory capacity for
SDHC). It cannot access (or, need longer time to access) those devices with big memory capacity.
Playing The Entire flash disc
In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY mode to avoid the main
unit and USB DEVICE or SD CARD were damaged.
INFO
Note :
F1 F2 F3
F4 F5
CD/MP3/WMA OPERATION
Listening To Compact Disc (CD/MP3/WMA)
1. Press the CD/iPod/USB/CARD button on the unit (or remote control) is select to CD/MP3 mode. The unit will read
the CD/MP3/WMA disc automatically.
2. P
(F1)
3. Insert the CD/MP3 disc into the CD compartment, press the CD to close the CD door.
Note: 1. This unit can play CD, CD-R, CD-RW, MP3 and WMA discs. It also play the "8 cm" and "Multi Section" of MP3
DISC.
2. The "Playback Transfer Bit Rate in MP3 is 32 - 320 kbps and WAM is 64 - 320 kbps.
3. The "Max Readable 99 folders and 999 tracks. If no disc or can not read the TCO, "NO DISC" will be
displayed.
Playing The Entire CD/MP3/WMA
- CD
1. Insert the CD disc into the CD compartment, the main unit will automatically read the total number of the folders
and tracks at the same time, the unit will play the first track automatically.(F2)
2. Press the PLAY/PAUSE/SCAN button once, the time elapsed indicator will flash.(F3)
3. Press the SKIP/TUNE SEARCH(UP or DOWN) button once to change Track NO., press and hold the SKIP/TUNE
SEARCH (UP or DOWN) button to skip fast forward or backward of each song.
4. Press the PLAY/PAUSE/SCAN/ENTER button once more to resume the playback. To stop by pressing the
STOP/MENU/INFO button.
- MP3/WMA
1. Insert the MP3/WMA disc into the CD compartment, the main unit will automatically read the total number of the
folders and tracks at the same time, the unit will play the first track automatically.
2. Press the PLAY/PAUSE/SCAN/ENTER button once, the time elapsed indicator will flash.
3. Press the SKIP/TUNE SEARCH(UP or DOWN) button once to change Track NO., press and hold the SKIP/TUNE
SEARCH(UP or DOWN) button on the unit once (or remote control) to skip fast forward or backward of each song.
4. To resume playback, press the PLAY/PAUSE/SCAN/ENTER button once more again.
5. To change the ALBUM NO., press the FOLDER/ARROW (UP or DOWN) button on the remote control once.
6. To stop playback, press the STOP/MENU/
button once on the unit (or remote control).
ress the CD DOOR OPEN/CLOSE button on the main unit only, and then the CD door will open automatically.
OPEN/CLOSE button
Note: If the main unit is not working properly, disconnect the power source and then reconnect it again.
INFO
ID3 OPERATION
During in the MP3/WMA mode
1. Press the ID3/iPod/MEM/C-ADJ. Button on the unit (or remote control) once to open the ID3 function.
2. If the MP3/WMA file is written “ID3”, it will automatically search the information of “TITLE NAME”, “ARTIST NAME”
and “ALBUM NAME” indicated on the display .
3. Press the ID3/iPod/MEM/C-ADJ. button on the unit (or remote control) again. Then the unit will resume to play
normally.