Lenco MCi-220 - Manual (Page 9)

MUTE SETTING (on the remote control)
Press the MUTE button on the remote control to stop the sound from the speakers temporarily, the sound stops and
the display will show “MUTE”. To cancel mute, press the MUTE button again or press the VOLUME +/-, “MUTE”
disappears in the display and the sound is restored.
LISTEN TO THE MUSIC BY USING HEADPHONE
penal
SPECIFICATION
POWER SUPPLY : AC 230-240V~50Hz
OUTPUT POWER : 20 Watts x 2
UNIT DIMENSION : 152 (W) x 222 (D) x 218 (H) mm
SPEAKER BOX DIMENSION : 140 (W) x 222 (D) x 218 (H) mm
N. W. : 5.45kg
RADIO SECTION
FREQUENCY RANGE : FM 87.5 - 108 MHz
DAB/DAB+ 174 - 240 MHz
COMPACT DISC SECTION
OPTICAL PICKUP : 3 - BEAM LASER
FREQUENCY RESPONSE : 100Hz - 16kHz
Plug your headphones (3.5mm mini-stereo plug) into the headphones jack on the light of the unit. The sound
will be heard through the headphones, not the speaker.
SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
Ventilation warning : " The normal ventilation of the product shall not be impeded for intended use."
UK-8
If at any time in the future you should need to dispose of this product please
note that: Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice. (Waste Electrical and Electronic Equipment Directive)