Lenco MMC-2900 - Manual (Page 7)

GB 5
MP3/WMA/USB/SD/MMC display
CD display
FOR MP3/WMA/USB/SD/MMC PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order.
�p to 40 tracks can be programmed.
1. At the stop mode, when the PROGRAM button is pressed, then enter program mode. button is pressed, then enter program mode. is pressed, then enter program mode.
2. The program LED will light up And LED F 01 will be flashing, waiting for enter the
Folder number by pressing BACK �� TIME �ET DOW�� or NEXT / TIME SET UP button. / TIME SET UP button. button.
3. To confirm the selected Folder, press PROGRAM button again. button again. again.
4. Then LED P 01 will be flashing, waiting for enter the track number by pressing
BACK / TIME SET DOWN or NEXT / TIME SET UP button. / TIME SET UP button. button..
5. To confirm the selected track, press PROGRAM button again. button again. again.
6. Repeat this procedure.
��ote: Press the �TOP button twice will turn off the programmed track or foloder.
PROGRAMMED CD OPERATION
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order.
�p to 40 tracks can be programmed.
1. At the stop mode, when the PROGRAM button is pressed, then enter program mode. button is pressed, then enter program mode. is pressed, then enter program mode.
2. The program LED will light up.
3. And LED P 01 will be flashing, waiting for enter the track number by pressing
BACK / TIME SET DOWN or NEXT / TIME SET UP button. / TIME SET UP button. button..
4. To confirm the selected track, press PROGRAM button again, then LED P 02 will be flashing. button again, then LED P 02 will be flashing. again, then LED P 02 will be flashing.
5. Repeat this procedure.
��ote: Press the �TOP button twice will turn off the programmed track or folder.
FOR MP3 / WMA / USB PLAYBACK
Mode sequence REPEAT >> REPEAT ALL >> FOLDER >>
RA��DOM >> CLEAR.
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT >> REPEAT ALL >> RA��DOM
>> CLEAR.
REPEAT , REPEAT ALL , RANDOM, FOLDER PLAYBACK
MP3/WMA/USB display
CD display
Press PLAY MODE button during stop mode.
For CD: Total number of tracks will be shown.
For MP3/WMA/USB/SD/MMC: Total number of tracks & folder will be shown.
During Repeat 1 mode,
the Repeat LED will
light up.
During Repeat 2 mode,
the Repeat LED will be
flashing.
During Repeat 3 mode,
the Random LED will
light up.
Note on CD-R/RW discs
- Because of non-standardized format definition�� production
of CD-R��RW, playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R��RW due to recording conditions,
such as PC performance, writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R��RW discs for easy reading.
During Repeat 4 mode,
the LED will turn off.
During Repeat 5 mode,
the LED will turn off.
During Repeat 1 mode,
the Repeat LED will
light up.
During Repeat 2 mode,
the Repeat LED will be
flashing.
During Repeat 3 mode,
the Folder LED will be
flashing.
During Repeat 4 mode,
the Random LED will
light up.
FOLDER UP
When the Disc ( MP3 or WMA format ) is at play mode , press "Program��Folder up" button, Folder up
function take place and go to next folder, if press the "Program��Folder up" again, then next next folder
will take place accordingly.
When the Disc is at stop mode, press "Program��Folder up" button, Program function take place and
press "next" button or "back" button to choose the song program.