Lenco MP3 Sportwatch-100 - Manual (Page 20)

R10_20140702
20
selection, or tap the desired file to start the play.
 One desired file is chosen, the file will play automatically by the relevant
interface program.
 In Now Playing interface, press or pressing the function’s key and or tap
the relevant icons, or slide to Up / Down / Left / Right on screen for the
wanted function. (refer to item D above mentioned functions for
reference)
M. Use Bluetooth Menu
 In music playing mode (playing a music), then go to Bluetooth menu, tap
it to enter into Bluetooth interface.
1. Turn ON and OFF the Bluetooth Function:
 Tap the “OFF” icon on screen, the Bluetooth is turning into “ON” and a
message “Please wait …!” pop up on screen. For few seconds, a “Paired”
interface show “ON” will appear to use;
 To turn “OFF” the Bluetooth Function, tap the “ON” icon.
2. Search and Pair with Bluetooth receiver device:
 Before pairing, please make sure your Bluetooth Receiver Device
supports Bluetooth A2DP profile.
 Keep the device in 1 meter of your Bluetooth receiver device.
 Switch on your Bluetooth receiver device and enable it to searching /
pairing mode.
 Then, in Paired interface, tap “Scan” icon or slide to left on screen, to
start the scanning function, for approximately 10 ~ 30 seconds; an
“Available” list with found device’s name will appear to choose for
pairing.
 Tap the wanted “Device Name” in list on screen for pairing, page up the
device name list for looking your desired name of device when necessary,
wait for few seconds both device should be paired, the current playing
music will play automatically from your Bluetooth receiver device, and a
Bluetooth icon “ “is displaying at the right side of chosen device item
in list. Both devices are paired.
3. Change playing music file:
 In Bluetooth transmitting mode, exit and go into Music Now Playing
interface for change the playing file if necessary.
 In Music Now Playing interface, tap
/ icon for changing play file.
 Tap / icon for pause or play the music.
4. Disconnect with Connected Bluetooth device:
 In Paired interface, tap the item of connected device name in list, a dialog
box “Disconnect?” appear to confirm. Tap “Yes” icon to confirm, or “No”
to abort.
5. Unpair with Connected Bluetooth device:
 In Paired interface, tap and hold the item of connected device name in list,