Lenco PA-81 - Manual (Page 6)

EN-5
8. PLAY/PAUSE button:
Press this button to toggle between play/pause of MP3 player
9. TRACK/FOLDER:
Turn this select button to fast navigating the track or folder, and press to
confirm the selection.
Press and hold for 1 sec to enter folders navigation
10. MIC level:
Turn this knob to control the level of microphone input.
11. MASTER level:
Turn this knob to control the level of master output. The Bluetooth/AUX
input volume will be controllable with this master output
12. Battery level indicator:
This LED indicators show the internal battery level,in order to maintain best
sound quality,please connect to AC power when battery level drops to low.
13.
MIC in:
This jack input can take a 6.3 mm unbalanced cable for microphone input.
14. AUX in:
You can connect your music device to this socket with a 1/4” jack cable.
15-16. Bluetooth control button and status
Press this button according to below instructions for different operation:
Short press 1 sec: Turn on Bluetooth and old paired device can be connected to
PA-81, or PA-81 will search for new Bluetooth activated device for pairing.
Press/Hold 5sec: Turn on Bluetooth and PA-81 will enter “Pairing Mode”, new
device can be connect to PA-81
(Search for “Lenco PA-81” on your device, enter “0000” if PIN is requested)
Press/Hold 10sec: Turn off Bluetooth and all connection will be lost
(Note: If no device is paired to PA-81 for 2min, Bluetooth will be turn OFF
Only 1 device can be paired to PA-81 at a time)
17. Charging indicator LED
Battery will be charged only when AC power is connected and power is ON. When
charging in progress charging LED will ON. When charging complete and AC power is
detached, charging LED is OFF