Lenco Playconnect - Manual (Page 4)

4 5 EN - - EN
LENCO PLAYCONNECT INstruction MANUAL LENCO PLAYCONNECT INstruction MANUAL
4. Get ready
1. Minimum requirements
Android Phone ( 4.1 minimum) or iPhone (from iPhone 4 with IOS 7.0 and later).
- Router WiFi 802.11n, with WPA2-PSK encryption (AES)
- ADSL or Optical Internet connection
- For Multiroom or High Resolution playing, a 5 GHz multimedia router (speed> 600Mbps)
is highly recommended.
- For the best operation, the router must be placed at the center of the house or
apartment.
2. Download and Install the “Lenco PLAYLINK” App to your mobile phone:
Open an account or use your existing parameters to connect on Google or Apple stores.
Android Phone : Go to Google Store and look for PLAYLINK App, then download it.
iPhone: Go to Apple Store and look for PLAYLINK App, then download it
Open the file manager and install the App.
3. Connect your unit into your internet environment:
Install your unit in a dry and cool place of your living room. Care to place it on a stable
support (not on another electric device producing heat).
Install the unit in a place you are sure to receive the WiFi Signal from your Home WiFi
router, or at Ethernet connection.
Connect the device to a normalized AC outlet with the delivered AC adapter.
The Power key: Press the Power key The LED indicator turns to flashing yellow.
Press the Power key The LED indicator turns to flashing yellow. Wait the LED turns to
flashing white to get your playconnect WiFi visible by other WiFi devices.
3.1: Connect your speaker with the “Quick Connect” key:
Your home router must have a WPS key function. Please check your router
instruction manual first and look for WPS key symbol.
Connector to plug the DC cable of the adaptor delivered with your
PLAYCONNECT.
Important: Only use the original type AC adaptor delivered, never
another one!
Optical Output to connect to a stereo amplifier with optical input
capability. The optical connection uses a fixed sampling rate of 44.1KHz.
Ethernet LAN connection to connect your PLAYCONNECT to a cable
LAN instead of WiFi network.
Analog Left and Right outputs to connect to your stereo Amplifier.
For easy connection to your home WiFi network. (WPS)
This key has a double function:
Short press (one second): set the device in DIRECT MODE. In this
mode you can stream music directly without need of a local wireless
network.
Long press (more than 5 seconds): RESET: Return to factory setting
(delivery status)
Rear panel
3 4 5 7 8
6
3. DC IN
4. Optical
5. Ethernet
6. L/R line
Outputs
7. Quick
Connect
8. DIR MODE
/RESET
LANU SB INTERNET
RESET