Lenco Playconnect - Manual (Page 5)

6 7 EN - - EN
LENCO PLAYCONNECT INstruction MANUAL LENCO PLAYCONNECT INstruction MANUAL
4. Play music
Please make sure your mobile devices and audio devices (Audio adapter, Speakers)
are connected to the same WiFi network.
4.1 From your mobile phone/ tablet:
a. Open the LENCO PLAYLINK app on your mobile phone/tablet and wait your unit to be
displayed (Display “PLAYCONNECT-xxxxxx-AJ” or the friendly name if you setup
already).
Note:
1. if you have several audio devices connected on your WiFi network, it will appear as a
list.
2. Depending the speed of the network, the audio device may need up to one minute to
be displayed.
b. Select the audio device on which you want to play, the app asks you to select the
source of the music.
c. Select : “Music on this device”, the songs presents on your mobile phone/ tablet are
displayed.
d. Browse the list and add the songs you want to play on your play list.
e. Press the circle button to come back to the list and add more songs.
ANDROID IOS ANDROID IOS
ANDROID IOS ANDROID IOS
Press the WPS key of the router and the Quick Connect key of the playconnect
simultaneously. The LED is flashing fast (white). After around 10~ 40 seconds, the WiFi
LED on the device becomes permanent white: The unit is connected to your network.
3.2: Connect your device using a browser:
If your router does not have a WPS key, open the WLAN settings on your mobile phone
or on your computer and look for the WiFi network: PLAYCONNECT xxxxxx-AJ (xxxxxx
depends of your device serial number).
Select and connect to this network.
Open your browser, you will be automatically redirected on the login web page. If you are
not automatically redirected, type in your browser the address: 172.19.42.1
Input a friendly name for your unit (this is the name that will be shown on the app when
you will play from your mobile phone), can be Living room, Bedroom, or whatever.
Select your network name in the scrolling menu, then input your home network password.
Click on “Connect”, your device is looking for your home network, when connected the
WiFi LED will turn to permanent white.
Note: This WiFi connection works only with factory default or after a reset.