Lenco SB-0160 - Manual (Page 13)

12
2. In the paired status, follow the steps 2-5 of Pairing section to
connect with another device automatically.
USB Playback:
1. Insert the USB device to the USB port on the rear panel of the unit.
2. Press the USB button on the remote control to enter the USB mode.
Or press the Mode button on the front panel to switch to USB mode.
3. The unit will automatically detect the USB drive and start playing
the files when it finds the USB drive.
4. Please refer to Basic operation for more detailed operations.
Note:
• USB-extension cable should have a maximum length of 0.5m.
• Depending on the amount of data and media speed, it may take
longer for the system to read the contents of the media device. In
some cases, reading time may be as long as 60 seconds. This is
not a malfunction.
• The supported format for USB play is MP3.
• E
ven when the files are in a supported format, some may not play
or display depending on the contents.
• The unit supports the USB device of capacity on or below 32GB.
• The unit supports maximum 128 folders in the USB device.
• This device has been developed in line with the latest technical
advances in the USB field. The wide range of different USB storage
devices of all types which are currently on the market, unfortunately
do not allow us to guarantee full compatibility with all USB storage
devices. For this reason, in rare cases there may be problems in
playing back files from USB storage devices. This is not a
malfunction of the device.