Lenco SCD-89 CD - Manual (Page 5)

FOR BETTER RECEPTION
FM
COMPACT DISC PLAYBACK
1. Set to CD
2. Open the disc holder by pushing the Open / Close
CD button.
3. Insert a disc with the label side facing up.
4. Close the CD door.
The disc will rotate and the total tracks of the disc
will show on the display.
5. Press the Play/Pause button.
"PLAY " & Track number "1" will be shown. FUNCTION
TO STOP PLAYBACK
Press the STOP button and the display shows the total
tracks of the disc.
TO INTERRUPT PLAYBACK
Press the Play/ Pause button and the word " PLAY
" will be flashed. Press the button again to resume
playback.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the skip buttons according to the
desired skip direction.
• Play/back resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or button pressed during playback, and release the button as soon as you recognise the desired
passage. Then normal CD playback will resume from this point.
GB 3
CD display
CD
PLAY
CD display
NOTE :
1. FM stereo LED indicator lights if receive FM stereo broardcast and
the MODE switch set on "FM STEREO".
2. When too much noise is heard during FM STEREO reception,
set MODE switch to FM mono.
AFTER LISTENING
Set the FUNCTION selector to TAPE.
Unit will be automatically off after 15mins without any operation (in stop mode / CD door open).