Lenco SCR-97 USB - Manual (Page 6)

GB 4
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be played in
the desired order. Up to 20 tracks can be programmed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Press the " PROGRAM " button again to memorize
the track.
4. Repeat steps 2 and 3 until all desired tracks are
programmed.
5. Press the " PLAY/PAUSE " button to start.
" " , " PROG " & track number are shown on the
CD display.
6. Press the " STOP " button once to stop programmed
playback.
7. Press the " PLAY/PAUSE " button to resume
programmed playback.
8. Open the CD door, turn off the
CD player or press the
" STOP " button twice to clear
the programmed memory.
Note :
Programming can only be
made when the player
is in stop mode.
FOR MP3 / WMA / USB PLAYBACK
Programmed playback enables folders/albums or tracks on a
disc to be played in the desired order. Up to 20 folders/albums
or tracks can be programmed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Repeat steps 2 and 3 until all desired folders or tracks
are programmed.
4. Press the " PLAY/PAUSE " button to start.
" ", " PROG " and " MP3 / WMA / USB " & track
number are shown on the CD display.
5. Press the " STOP " button once to stop programmed
playback.
6. Press the" PLAY/PAUSE " button to resume
programmed playback.
7. Open the CD door, turn off the CD player or press
the " STOP " button twice to clear the programmed
memory.
Note :
Programming can only be
made when the player is
in stop mode.
MP3 / WMA / USB
display
" PROGRAM "
CD display
" PROGRAM "
Note on CD-R/RW discs
- Because of non-standardized format definition/
production of CD-R/RW,
playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions,
such as PC performance, writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
FOR MP3 / WMA / USB PLAYBACK
Mode sequence REPEAT >> REPEAT FOLDER >>
REPEAT ALL >> MIX >> CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 3 mode,
display shows
During Mix mode,
display shows
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT >> REPEAT ALL >> MIX >>
CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Mix mode,
display shows CD display
MP3 / WMA / USB display
USB OPERATION
1. Set to USB.
2. Connect USB disk or MP3 player into the USB port.
3. Press the STOP / CD / USB button and
display will show total track & "USB".
4. Press the PLAY/PAUSE button to start playback.
note: USB connector does not support connection with USB extension cable and
it is not designed for communication with computer directly.
Manufacturer is not responsible for the playability of USB disk or MP3 player
due to recording condition, capacity, interface compatibility, etc.
Due to different formats, some USB disks or MP3 players may take longer time to be read.
USB stick is direct connected or with a cable with max. 0,5 m length.
Unit will be automatically off after 30mins without any operation (in stop mode).
STOP / CD / USB
USB display
FUNCTION
CD/USB