Gb 5, C d a b, Maintenance – Lenco SCR-97 USB User Manual

Page 7

Advertising
background image

GB 5

RECORDING

USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.

1 . Insert the cassette tape.

2 . Press the PAUSE button.

PAUSE

4 . Prepare to play the source to be recorded and play it.

Recording from the radio

Recording from a CD

FUNCTION

CD/USB

FUNCTION

RADIO

PLAY THE CD/USB TUNE INTO A STATION

3 . Press the RECORD button.

RECORD

5 . Press the PAUSE button.

TO STOP RECORDING

Press the STOP / EJECT button.

TO INTERRUPT RECORDING

Press the PAUSE button.

To resume recording, press the PAUSE button again.

TO ERASE A RECORDED TAPE

1. Set the FUNCTION selector to TAPE.

2. Insert a tape with the side you want to erase facing you.

3. Press the RECORD button to start erasing.

PAUSE

TO STOP PLAYBACK

Press the STOP / EJECT button.

TO INTERRUPT PLAYBACK

Press the PAUSE button.

To resume play, press the PAUSE button again.

TO FAST WIND

Press the REWIND or F.FWD button. Press the STOP/EJECT

button to stop winding at the desired position.

PLAY

3 . Press the PLAY button.

TAPE PLAYBACK

1 . Set to TAPE

FUNCTION

TAPE

2 . Insert the cassette.

Unit will be automatically off after 4.5 hours

without further operation.

CLEANING THE UNIT

Do not use volatile chemicals on this unit. Clean by lightly wiping

with a soft cloth.

IMPORTANT NOTE

If an abnormal display indication or an operating problem occurs,

disconnect the AC power cord and remove the batteries. Wait at least 5

seconds, then reconnect the AC power cord or reinstall the batteries.

WARNING

Should the CD door be opened before the reading of the CD completed, a

jamming noise may occur. This is resolved by closing the CD door.

CLEANING THE TAPE HEADS

To maintain optimum sound quality, clean the playback/

record heads ( a ) ,erasure head (b), pinch rollers (c),

and capstans (d) regularly (every 10 hours of use ). Use

a cotton swab lightly moistened with cleaning fluid or

denatured alcohol.

c d a b

CLEANING CD

If the CD skips or will not play , the disc may need

cleaning. Before playing, wipe the disc

from the centre out with a

cleaning cloth. After playing,

store the disc in its case.

MAINTENANCE

CLEANING THE CD LENS

If the CD lens is dusty, clean it with a brush-blower. Blow several

times on the lens and remove the dust

with the brush. Finger prints may be

removed with a cotton swab moistened

with alcohol.

Advertising