Lenco Walky Box - Manual (Page 9)

8
Basic connection
Ensure all the cables are disconnected from the main unit before connecting to AC power
source by AC power adaptor.
Read through the instructions before connecting other equipment.
Do not charge up the battery pack while the DVD player is working with the battery pack.
Connecting to AC power source
Rechargeable battery use
The player built-in a rchargeable Llithium battery.
The battery charge if it is used correctly, is of 2 hours time.
1. Charge the battery
-Connect the adaptor to the DC 12V IN jack, then set the unit in POWER ON mode for fully
charge ( SLOW CHARGE).
-Or set in POWER OFF mode for fully charge (FAST CHARGE).
And the indicator is red during charging; it gets green when charging completed.
2. Time to recharge the battery
Recharge and playback time depends on battery pack capacity and the temperature condition.
Generally speaking, the battery needs to be charged about 3 hours in FAST CHARGE mode
And about 12 hours in SLOW CHARGE mode.
3. Using and Maintaining Rechargeable Battery
-The normal working condition temperature is: 0 ~45 ;
-Always unplug AC/DC power supply for the unit whenever not playing.
NOTE: A new battery pack which has not been used or one which has not been used for more than
a month, may appear to not recharged enough, this is due to the characteristic of this battery and
is not a malfunction. In this case, recharge it two or three times before the first use. It needs more
than 6 hours to recharge battery while playing discs.
Noises may be generated during recharging. In this case, use a more distant power socket.
Do not recharge or discharge battery near a heating element such as a heater or direct sunlight.