Denon S-101 - Manual (Page 58)

55
ENGLISH
System Setup System Setup
ENGLISH
Page Default settings Setup items
System setup items and default values (set upon shipment from the factory)
LANGUAGE
SETUP
OSD LANGUAGE
Set the OSD setup display language for modes other than playback
and pause.
ENGLISH
DIALOG Set the language of the sound output from the speakers.
Set the language of the subtitles displayed on the TV.
Set the language of the menus recorded on the disc (top menu, etc.).
ENGLISH
SUBTITLE OFF
DISC MENUS ENGLISH
TV TYPE Set your TV’s video format (NTSC, PAL or MULTI). NTSC
PROGRESSIVE MODE Set the progressive mode (AUTO, FILM, VIDEO). AUTO
VIDEO
SETUP
SPEAKER SETUP
AUDIO
SETUP
CHANNEL
LEVEL
TEST TONE FRONT LCH FRONT RCH SUBWOOFER
DISTANCE
This parameter is for optimizing the timing with which
the audio signals are produced from the speakers and
subwoofer according to the listening position.
At the listening position, listen to the test tones
output from the different speakers and set so that the
playback level from the different speakers is equal.
OFF 0 dB 0 dB 0 dB
DISTANCE
FRONT
LCH
FRONT
RCH
SUBWOOFER DEFAULT
SPEAKER
LOCATION
INPUT MODE
DIGITAL OUT
LPCM (44.1 kHz/48 kHz)
COMPRESSION
AUDIO DELAY
FEET 9 ft 9 ft 9 ft ON
To achieve the best acoustics, set the location of the
speakers and the conditions in the room.
LOCATION
When DVD or AUX was selected as the input function, use this to
select the input mode.
Use this to select the digital output’s signal format.
Use this to set the digital audio output when playing DVDs recorded
in linear PCM audio.
Use this to adjusts the dynamic range of the Dolby Digital or DTS
sound.
Use this to synchronize the sound and video.
AUTO
NORMAL
OFF
OFF
0 mSEC
48, 49
49, 50
46
46
46
47
47
43
43
43
43
45
45
47, 48
ROOM DAMPING
2:ON SHELF MID