Altera Arria 10 Avalon-MM - Manual (Page 17)

Interface Width ALMs M20K Memory Blocks Logic Registers
128 1900 25 2900
Avalon-MM Interface–Completer Only
64 650 8 1000
128 1400 12 2400
Avalon-MM–Completer Only Single Dword
64 250 0 350
Related Information
Fitter Resources Reports
Recommended Speed Grades
Recommended speed grades are pending characterization of production Arria 10 devices.
Related Information
• Area and Timing Optimization
• Altera Software Installation and Licensing Manual
• Setting up and Running Analysis and Synthesis
Steps in Creating a Design for PCI Express
Before you begin
Select the PCIe variant that best meets your design requirements.
• Is your design an Endpoint or Root Port?
• What Generation do you intend to implement?
• What link width do you intend to implement?
• What bandwidth does your application require?
• Does your design require CvP?
1. Select parameters for that variant.
2. Simulate using an Altera-provided example design. All of Altera's static PCI Express example designs
are available under <install_dir>/ip/altera/altera_pcie/ . Alternatively, generate an example design that
matches your parameter settings, or create a simulation model and use your own custom or third-
party BFM. The Qsys Generate menu generates simulation models. Altera supports ModelSim-Altera
UG-01145_avmm
2015.05.14
Recommended Speed Grades 1-11
Datasheet Altera Corporation
Send Feedback