Altera Arria V SoC - Manual (Page 32)

5–12 Chapter 5: Board Test System
Using the Board Test System
Arria V SoC Development Kit June 2014 Altera Corporation
User Guide
The FMC A Tab
The FMC A tab allows you to perform loopback tests on the FMC A port. Figure 5–7
shows the FMC A tab.
1 For factory testing, you must have an FMC loopback card installed on the FMC
connector for this test to work correctly.
The following sections describe the controls on the FMC A tab.
XCVR 10G and CMOS
■ Data rate —Displays the current XCVR 10G (or CMOS) data rate in megabytes per
second (MBps).
■ Freq —Displays the data rate frequency in MHz which is equivalent to MBps.
■ Bits —Displays the number of bits transmitted since clicking Start.
■ Inserted errors —Displays the number of errors inserted by clicking Insert Error
button.
Figure 5–7. The FMC A Tab