Altera Audio Video Development Kit, Stratix IV GX Edition - Manual (Page 39)

Chapter 6: Board Test System 6–17
Using the Board Test System
© November 2009 Altera Corporation Audio Video Development Kit, Stratix IV GX Edition User Guide
■ Color bar test pattern —Specifies the test pattern to output to the monitor. The
following choices are available:
■ Color bar
■ Red
■ Green
■ Blue
Table 6–2 shows the color bar test pattern and corresponding color names and
RGB values.
■ Resolution —Specifies the resolution to output to the monitor. The following
choices are available:
■ 1080p —1920 × 1080 progressive
■ 720p —1280 × 720 progressive
■ Start —Initiates the test.
■ Stop —Terminates the test.
■ Get EDID —Reads the extended display information data (EDID) from the
monitor and displays the results.
SDI
Testing the SDI requires connecting a SMB loopback cable as shown in Figure 6–9 .
Table 6–2. HDMI Color Bar Test Pattern
Color Bars Color RGB Values
White/Grey 180,180,180
Yellow 180,180,16
Cyan 16,180,180
Green 16,180,16
Magenta 180,16,180
Red 180,16,16
Blue 16,16,180
Black 16,16,16