Altera Audio Video Development Kit, Stratix IV GX Edition - Manual (Page 45)

Chapter 6: Board Test System 6–23
The Power Monitor
© November 2009 Altera Corporation Audio Video Development Kit, Stratix IV GX Edition User Guide
The following sections describe the Power Monitor controls.
General Information
The General information controls display the following information about the
MAX II device:
■ MAX II version —Indicates the version of MAX II code currently running on the
board. The MAX II code resides in the <install
dir>\kits\stratixIVGX_4sgx230_av\factory_recovery directory. Newer revisions
of this code might be available on the
Audio Video Development Kit,
Stratix IV GX Edition page of the Altera website.
■ Power rail —Indicates the currently-selected power rail. The rotary switch (SW2)
on your board controls which rail to measure. After setting the switch for the
desired rail, click Reset to refresh the screen with new board readings.
f A table with the power rail switch positions is available in the
Stratix IV GX FPGA Development Board Reference Manual .
Figure 6–12. The Power Monitor