Altera DSP Development Kit, Cyclone II Edition Getting Started User Manual
Page 28
Advertising
![background image](/files/763716/content/doc028.png)
2–18
Getting Started User Guide
Altera Corporation
DSP Development Kit, Cyclone II Edition
August 2006
Testing the Board Using the Factory Design
shows the location of jumpers J30, J35 and J37 on the
Cyclone II DSP development board.
Figure 2–8. Locations of Jumpers J30, J35 & J37
shows the jumper settings described in
and
.
Figure 2–9. Jumper Connections for J35, J37 & J30
5.
Start the Quartus II software.
6.
Choose Open Project (File menu). In the Open Project dialog box,
browse to the directory:
<path>\CycloneII_DSP_Kit-v.6.0.1\Examples\
FactoryDesign_ChA
J35
J37
J30
J30
Pin 1
Pin 6
Pin 5
J37
Pin 1
Pin 2
OSC
PLL
SMA
J35
Pin 1
Pin 2
OSC
PLL
SMA
Advertising