Altera DSP Development Kit, Cyclone II Edition Getting Started User Manual
Page 29
Advertising
Altera Corporation
Getting Started User Guide
2–19
August 2006
DSP Development Kit, Cyclone II Edition
Getting Started
7.
Select sines.qpf, which contains project definitions for the edge
detection reference design, and click Open.
8.
The Signal Tap II file (.stp) provided with the design, sines.stp,
automatically opens when you open the sines project. To bring it to
the front, choose sines.stp (Window menu).
9.
Expand the bus signals.
shows sines.stp displayed in
the SignalTap II logic analyzer.
Figure 2–10. Sines.stp Displayed in the SignalTap II Logic Analyzer
1
If you modify and recompile the design, specify your new
SOF and click Progam Device in the SignalTap II window
to configure the device with your SOF.
Advertising