Altera FIR Compiler - Manual (Page 19)

Chapter 2: Getting Started 2–5
MegaWizard Plug-In Manager Flow
© May 2011 Altera Corporation FIR Compiler User Guide
c Use the simulation models only for simulation and not for synthesis or any
other purposes. Using these models for synthesis creates a non-functional
design.
4. Select the required language from the Language list.
5. Click the MATLAB M-File tab on the Set Up Simulation page ( Figure 2–5 ).
6. Turn on the Generate MathWorks MATLAB M-File option.
This option generates a MATLAB m-file script that contains functions you can use
to analyze a FIR Compiler design in the MATLAB environment. A testbench is also
generated.
7. Click Finish.
1 The Quartus II Testbench tab contains an option that is not used in this version of the
FIR Compiler and should be ignored.
Figure 2–5. Create a MATLAB M-File