Altera Transceiver Signal Integrity Development Kit, Stratix IV GT Edition - Manual (Page 7)

Chapter 1: Overview 1–3
General Description
November 2011 Altera Corporation Transceiver Signal Integrity Development Kit,
Stratix IV GT Edition Reference Manual
■ General User Input/Output
■ 8-position user DIP switch
■ Six user push buttons
■ Hex rotary switch
■ Eight user LEDs
■ 16 character × 2 line LCD
■ Components and Interfaces
■ 10/100/1000 Ethernet PHY and RJ-45 jack
■ Transceiver channels
■ Six full-duplex transceiver channels from GXB0 transceiver block brought
out to the backplane connectors
■ Four full-duplex transceiver channels from GXB1 transceiver block brought
out to the SMA connectors
■ Two channels from GXB2 transceiver block brought out to the SMA
connectors. One channel is routed with 15 inches of board trace length on
transmit and 5 inches board trace length on receive to simulate the
degradation associated with long trace PCB routing
■ Power
■ 14-V – 20-V DC input
■ 2.5-mm Barrel Jack for DC power input
■ On/Off slide power switch
■ On-Board power measurement circuitry
■ Heat Sink and Fan
■ 40-mm heat sink and 5-V DC fan combo