TOYOTA 2011 4Runner User Manual

Page 252

Advertising
background image

228

2-4. Using other driving systems

■

Shifting from L4L to H4L

Stop the vehicle completely.
Shift the shift lever to N.

Push the “UNLOCK” button and
turn the four-wheel drive control
switch to H4L.

Maintain this condition until the
low speed four-wheel drive indi-
cator goes off.

STEP

1

STEP

2

CTH24AS051

STEP

3

■

The four-wheel drive control switch can be operated when

The “ENGINE START STOP” switch is in IGNITION ON mode.

■

When the four-wheel drive control switch is turned to L4L

VSC and TRAC (TRC) are automatically turned off.

■

If the center differential lock indicator flashes

Locking or unlocking of the center differential is not complete. Drive straight
ahead while accelerating or decelerating, or drive in reverse.

■

If the center differential lock indicator flashes and a buzzer sounds

Locking of the center differential is not complete. Stop the wheels from slip-
ping or spinning and, if the indicator still flashes, operate the four-wheel drive
control switch again.

■

If the low speed four-wheel drive indicator continues to flash

The transfer mode may not successfully change. Operate the four-wheel
drive control switch again.

Advertising
This manual is related to the following products: