TOYOTA 2010 Sienna - Manual (Page 253)

227
2-5. Driving information
2
Wh
en drivin
g
Selecting tire chains
Use the tire chains of correct size and type.
Use SAE Class “S” type radial tire chains, with the exception of radial
cable chains or V-bar type chains.
Regulations on the use of snow chains
● Regulations regarding the use of tire chains vary according to loca-
tion and type of road. Always check local regulations before install-
ing chains.
● Install the chains on the front tires.
● Retighten the chains after driving 1/4 - 1/2 mile (0.5 - 1.0 km).
■
Snow chain installation
Observe the following precautions when installing and removing chains.
●
Install and remove tire chains in a safe location.
●
Install tire chains on the front tires only. Do not install tire chains on rear
tires.
●
Install tire chains following the instructions provided in the accompanying
manual.
■
When driving the vehicle
Accelerate the vehicle slowly and drive at a reduced speed suit-
able to road conditions.
■
When parking the vehicle
Park the vehicle and move the shift lever to P without setting the
parking brake. The parking brake may freeze up, preventing it
from being released.