TOYOTA 2010 Sienna User Manual

Page 257

Advertising
background image

231

2-5. Driving information

2

Wh

en drivin

g

Hitch

Trailer hitch assemblies have different weight capacities established
by the hitch manufacturer. Even though the vehicle may be rated for
towing a higher weight, the operator must never exceed the maxi-
mum weight rating specified for the trailer hitch.

■

Before towing

●

Ensure that your vehicle’s tires are properly inflated. (

→P. 463)

●

Trailer tires should be inflated according to the trailer manufacturer's rec-
ommendation.

●

All trailer lights must work in order to be legal.

●

Confirm all lights work each time you connect them.

●

Check that your vehicle remains level when a loaded or unloaded trailer
is hitched. Do not drive if the vehicle is not level, and check for improper
tongue load, overloading, worn suspension, or other possible causes.

●

Make sure the trailer cargo is securely loaded.

●

Check that your rear view mirrors conform to any federal, state/provincial
or local regulations. If they do not, install rear view mirrors appropriate for
towing purposes.

■

Break-in schedule

Toyota recommends that you do not use a new vehicle or a vehicle with any
new power train components (engine, transmission, differential, wheel bear-
ings, etc.) to tow a trailer for the first 500 miles (800 km) of driving.

■

Maintenance

●

If you tow a trailer, your vehicle will require more frequent maintenance
due to the additional load. (See “Scheduled Maintenance Guide” or
“Owner's Manual Supplement”.)

●

Retighten the fixing bolts of the towing ball and bracket after approxi-
mately 600 miles (1000 km) of trailer towing.

Advertising